| Article number | Description | Description | Unit | |
|
35110011
|
Clay Board
plastic | 30x40 cm
|
This board provides a nice solid surface or workplace for your work. The board of pressed hardboard is washable and shrink resistant (as our painting boards). After use easy to clean and they protect the table from dirt and scratches. Available in two sizes.
|
piece
|
|
|
35110012
|
Clay Board
plastic | 40x55 cm
|
This board provides a nice solid surface or workplace for your work. The board of pressed hardboard is washable and shrink resistant (as our painting boards). After use easy to clean and they protect the table from dirt and scratches. Available in two sizes.
|
piece
|
|
|
35110016
|
Clay Cutter
De Beeldhouwwinkel | wood | length 55 cm
|
A solid steel wire with a length of 55 cm (21.65 inch) firmly attached to two wooden handles. This is very convenient for cutting pieces of clay, but also to detach the workpiece from the surface.
|
piece
|
|
|
35110085
|
Clay Slats
De Beeldhouwwinkel | beech wood | length 30 cm / width 1 cm / dikte 2 cm
|
You can easily roll out pieces of clay of 1 cm (flat) or 2 cm (on the side) with the combination of the slats and roller. You place an amount of clay between the slats and roll the clay roller repeatedly until it touches the clay slats. The slats and roller are made of sanded beech wood.
|
pair
|
|
|
35110095
|
Clay Roller
De Beeldhouwwinkel | beech wood | length 30 cm / diameter 2 cm
|
You can easily roll out pieces of clay of 1 cm (flat) or 2 cm (on the side) with the combination of the slats and roller. You place an amount of clay between the slats and roll the clay roller repeatedly until it touches the clay slats. The slats and roller are made of sanded beech wood.
|
piece
|
|
|
35110515
|
Modelling Spatulas
De Beeldhouwwinkel | palm wood | length 15 cm
|
These modelling spatulas are made of sanded palm wood. This wood has the important quality that clay will not easily stick to it. The spatulas come in a set of 15 pieces with different modelling heads at both ends. With this very complete kit you have 30 different heads that allow you to make all possible designs and details in the workpieces. Available in 3 different lengths.
|
set
|
|
|
35110700
|
Band-Mirette
De Beeldhouwwinkel | beech wood | length 20 cm
|
For fine and rough modelling, scraping pieces of clay or caving workpieces, we have a variety of mirettes. The mirettes have a wooden handle and are 20 cm (7.87 inch) long. The band-mirettes have a solid flat wire, ideally suited for caving workpieces and wiremirettes for many different purposes and compositions.Both types are available in a set of six pieces with different heads: round, oval,
|
set
|
|
|
35110800
|
Wire-Mirette
De Beeldhouwwinkel | beech wood | length 20 cm
|
For fine and rough modelling, scraping pieces of clay or caving workpieces, we have a variety of mirettes. The mirettes have a wooden handle and are 20 cm (7.87 inch) long. The band-mirettes have a solid flat wire, ideally suited for caving workpieces and wiremirettes for many different purposes and compositions.Both types are available in a set of six pieces with different heads: round, oval,
|
set
|
|
|
35110900
|
Sculptor’s Thumb
De Beeldhouwwinkel | hardwood | length 11 cm
|
This sculptor’s thumb of hardwood is 11 cm (4.33 inch) long and is intended to affix small pieces of clay to larger pieces of clay.
|
piece
|
|